Megger MTB7671/2
- Tests the full range of a testers capability
- Does not trip RCD protected circuits
- Tests to the regulations BS7671, BS EN 61557, and IEE On-Site Guide
- Checks insulation, continuity, loop, PFC, RCD, and voltage measurement functions
- Confirms testers continued performance between calibrations
- Colour-coded test functions

Megger MTB7671/2
₹105,789Original price was: ₹105,789.₹101,698Current price is: ₹101,698.Request a Call Back
- Ask a Question

Megger MTB7671/2
₹105,789Original price was: ₹105,789.₹101,698Current price is: ₹101,698.Ask a Question
₹105,789 Original price was: ₹105,789.₹101,698Current price is: ₹101,698.
The MTB7671/2 instrument test box is designed to provide confirmation that your testers continue to operate properly, and maintain their accuracy and consistency between calibrations.
The NICEIC, ELECSA, and Corgi, among others, now request evidence that your testers comply with this. The MTB7671/2 checks not only the basic functions of the testers, but also that the correct test current or voltage is being used during the test. For example, a continuity test should not just give a result in ohms, but the short circuit test current should be greater than 200 mA and the open circuit voltage should be within the limits of 4 to 24 V.
The ‘Pass/Fail’ values are selected to ensure that, where there is a published specification for a test parameter, the MTB7671/2 will test your tester to ensure that it meets these specifications using a series of simple ‘Pass/Fail’ indications. Additional test values are provided to ensure that the testers maintain consistent values across the range of their operating specifications.
Based on 0 reviews
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
- AC Clamp Meter
- AC Electronic Load
- AC Leakage Clamp Meter
- AC Power Supply
- AC/DC Clamp Meters
- Accessories
- Air Quality Testing
- ANALOG MΩ HiTESTER
- Battery Tester
- Battery Testers
- Benchtop Digital Multimeter (DMM)
- Boom Barrier
- Calibration Instruments
- Calibration Tools
- Clamp Multimeters
- Coating Thickness Meter
- Data Logger
- DC Electronic Load
- DC Power Supply
- Digital Clamp Meter
- Digital Insulation Tester
- DIGITAL MULTIMETER
- Digital Multimeter
- DMM
- Earth Resistivity Tester
- Earth Tester
- Enclosure Box
- EV Charger
- FUNCTION GENERATOR
- Infrared Thermometer
- Insulation Resistance Tester
- Laser Distance Meter
- LCR Meters
- Loop and RCD Testing
- Lux Meter
- Magnetic Field
- Memory Hicorder
- Motor and Generator Testing
- Optical Test Equipment
- Oscilloscope
- Panel Meter
- Phase Detector
- Phase sequence
- Photovoltaic (PV)
- Power and Energy Meters
- Power Meter
- Power Meter Single Phase
- Power Quality
- Power Quality Analyzers
- Power Supplies
- Process Multimeter
- Resistance Tester
- SMPS
- Sound Level Meter
- TRMS Digital Multimeters
- Uncategorized
- Vibration Meter
- Voltage Detection
Related Products
- Insulation testing to 1000 MΩ
- Continuity testing at 200 mA down to 0.01 Ω
- Live circuit warning (voltage display) and test inhibit
- Digital/analogue display
- Alkaline or rechargeable batteries
- –10 °C to +55 °C operating temperature
- CATIII 600 V
- Conforms to EN61557-1
- Models -C.A 6505, C.A 6541, C.A 6543, C.A 6545, C.A 6547, C.A 6549
- The C.A 6541 is a high-performance 50V to 1kV insulation tester
- it supports the most demanding site conditions and is ideal for qualitative insulation analysis.
- Insulation testing up to 1000 V and 200 GΩ range
- Stabilised insulation test voltage (New)
- Single range, faster continuity testing from 0.01 Ω to 1 MΩ (New)
- 600 V T RMS AC and DC voltage measurement
- Live circuit detection and protection
- User variable insulation test voltage from 100V to 1000V (New) depending on model
- Test result storage and Bluetooth® downloading depending on model
- Rechargeable options for mains and car charging (New)depending on model
- CAT IV 600 V and IP54
- Fully compatible with CertSuite Asset test reporting software
Maximum 5kV Test Voltage – Up to 10 Teraohm of Insulated Resistance Testing
Key Features
- Measure insulation of high-voltage equipment (such as transformers, cables, and motors)
- Wide testing voltage range, up to 5.00 kV from 250 V DC
- Wide measurement insulation range, up to 10 TΩ
- PI (Polarization Index) and DAR (Dielectric Absorption Ratio) automatically calculated / display
- Data memory function to reduce handwritten notes
- Bright LED luminous scale
- Extended operating temperature range of -10°C to 50°C
- Extremely easy to use
- Tough rubber armoured case
- Self contained protective cover
- Live circuit warning
- Weatherproof to IP54
- Intelligent safety system for protection
- ■ 1 TΩ, 1.4 mA, 5 kV digital insulation tester with digital and analogue display
■ Five ranges; 250 V, 500 V, 1000 V,2500 V and 5000 V
■ Insulation (InS), Polarisation Index (PI) and variable timed test (t) modes
■ Selectable DC or AC voltmeter functions
■ Guard terminal to shunt surface leakage currents
■ CAT III 600 V safety rating
Features |
|
| Brand Name : | Megger |
| Type of Product : | Insulation Resistance Tester |
| Display : | Digital |
| Model No : | BM 5500 |
| Safety Rating : | CAT III 600 V |
| Color : | Grey |
- Insulation testing to 1000 MΩ
- Continuity testing at 200 mA down to 0.01 Ω
- Live circuit warning (voltage display) and test inhibit
- Digital/analogue display
- Alkaline or rechargeable batteries
- –10 °C to +55 °C operating temperature
- CATIII 600 V
- Conforms to EN61557-1
- Models -C.A 6505, C.A 6541, C.A 6543, C.A 6545, C.A 6547, C.A 6549
- The C.A 6541 is a high-performance 50V to 1kV insulation tester
- it supports the most demanding site conditions and is ideal for qualitative insulation analysis.
Product features
- measurement voltage selected within the range of 50…500 V with steps of 50 V and from 500 to 5000 V with steps of 100 V
- continuous reading of measured insulation resistance or leakage current
- automatic discharge of the measured object’s capacitance upon completion of insulation resistance measurement
- sound signalling of fi ve-second time intervals, facilitating capture of time characteristics
- timing of measurement time T1, T2 and T3 for measurement of dielectric absorption ratio (DAR) and polarization index (PI)
- reading of actual measurement voltage during measurement
- protection against measurement of live objects
- two- or three-lead method of insulation resistance measurement
- insulation resistance measurement according to the RampTest method and breakdown voltage measurement with ramping rate up to ~1 kV/s
- measurement of direct and alternating voltages within the range of 0…750 V
- 990-cell memory (11,880 entries), data transmission to PC via USB cable
- power supplied by accumulator
- instruments meet the requirements laid down by standard EN 61557
- the meter can be powered and charged from an external power adapter or from a car lighter socke
Leak Current Measurement, an Essential Part of Electrical Safety (for medical-use electrical devices)
Key Features
- Compliance with IEC 60601-1:2005 Ed 3.0, JIS T 0601-1:2012 for medical-use electrical devices and essential to electrical safety (*1)
- Compliance with Electrical Appliances and Materials Safety Act, JIS, IEC, and UL standards for general-use electrical devices
- Uninterrupted polarity switching function dramatically reduces cycle time
- Support for rated currents up to 20 A gives the instrument more than adequate capability for testing products designed to comply with new standards
- Communications functionality and external I/O support allow automatic testing on production lines
- Range: 6250 IN 5kV-200G Digital Insulation Tester
- 3 ½ Digits LCD Display, 1999 Counts, Backlight
- Data Hold
- Auto Ranging
- 3 in 1 Insulation Resistance, Phase Testing & Voltage Testing
- Standard Accessories : Carrying case, Test Leads ,Manual




Reviews
There are no reviews yet.